
ServicesWater Softeners
Water Softeners in Lakeland
Minerals in hard water leave chalky rings on your faucets, cloudy glasses and a layer of scale in the bottom of your water heater. We fit a softener to your water and to how many people use it. One small crew looks at your plumbing, does the install and shows you how it works.
What a softener does and when it makes sense
A softener holds a tank of small resin beads. As your water flows over them, the beads trap calcium and magnesium and give off a small amount of sodium or potassium instead. Those two minerals are what build up as scale on fixtures, inside pipes, in the water heater and in the dishwasher. Take them out and soap rinses away clean, glasses come out clear and your appliances aren't fighting buildup.
A lot of Central Florida water comes up through limestone, and that's where the hardness starts. The yearly water quality report from your water provider gives a hardness figure. We take that number and the size of your household and choose a unit that fits, not the largest one we could sell you.
Keep in mind a softener doesn't filter anything. Chlorine taste and smell pass right through it. Our Whole-Home Filtration and Chlorine & Chloramine Removal services handle that side, and we can set up both together when your home needs both.
What comes with a softener install
Sizing to your water
We pick capacity based on your hardness and how much water your home goes through in a day. Too small, and the unit cycles constantly and burns through salt. Too big, and you've paid for capacity you'll never use.
Bypass valve
A bypass lets you take the softener offline and keep water running to the house. It also makes any later service quick.
A proper drain connection
The softener flushes water out every time it regenerates. That discharge line ends above the drain with an air gap, so waste water can never be pulled back into your supply.
Brine tank setup
We set the salt tank somewhere you can get to without shuffling boxes or bikes. Then we fill it and kick off the first regeneration.
Programming and walk-through
We dial in the valve for your water and your household. Before we leave, we show you the settings, where the salt goes and how to switch to bypass, and we answer whatever you ask.
Workmanship coverage
The install is backed by a 1-year workmanship warranty. If something we put in isn't right, give us a call and the same crew comes back to sort it out.
Signs your home has hard water
White crust on fixtures
That chalky ring on faucets and shower heads is mineral scale. Scrub it off and it's back in a few weeks.
Spotty dishes
Glassware looks hazy or speckled after a wash cycle, and rinse aid doesn't fix it.
Soap that won't lather
It takes extra shampoo or dish soap to get suds going. Plenty of people also feel a film on their skin after showering.
Stiff, dull laundry
Minerals stay trapped in the fibers, so towels turn rough and colors fade sooner.
A noisy water heater
Popping or rumbling inside a tank-style heater is often a layer of mineral sediment sitting under the burner or element. That layer makes the heater run longer to get your water hot.
How the job goes
- 1
A phone conversation
You describe what you're noticing and how many people live in your home. We give you a straight read on whether a softener fits or whether filtration is the better answer.
- 2
A look at your plumbing
We visit to find where the main line comes in, where there's a drain and an outlet, and how much space you have. Then you get a written estimate with every line item listed.
- 3
Install day
Plan on us being there for a few hours, not all day. The water is off only briefly while we cut in the bypass and softener, run the drain and set the brine tank. Floor covers go down where we work, and we clean up before we leave.
- 4
Startup and follow-through
We run the first regeneration and check every joint for leaks. After that, the people who put it in are the people you call. We stay with you for upkeep, filter changes and any service the system needs down the road.
What moves the price
Every home is set up a little differently, so we price after we've seen the plumbing. Your estimate is written out line by line so you know what each part costs. These are the things that make the biggest difference.
- Size of the softener
- More people and harder water call for more capacity. A bigger tank and more resin cost more up front.
- Where it goes
- A garage with the main line right there is simple. Running new pipe to a utility room or outside pad adds labor and material.
- Drain and power
- The valve needs an outlet and the system needs a drain nearby. If either has to be added, that shows up on the estimate.
- Pairing with filtration
- Many homes add a carbon filter ahead of the softener for chlorine. Doing both at once costs more than one, but less than two separate visits.
- An old unit coming out
- If there's a worn-out softener in place, we remove and haul it off. Our Water Softener & Filtration System Replacement page covers that work in more detail.
Water softener questions
Something not covered here? (863) 656-3643
Will soft water taste salty?
Most people can't tell. The sodium a softener adds tracks with how hard your water was before treatment, so moderately hard water picks up only a little. You can fill the brine tank with potassium instead of salt, or add our Reverse Osmosis system at the kitchen sink for the water you drink and cook with.
What do I have to do to keep it running?
Mostly, keep salt in the tank. Lift the lid about once a month and top it off before it gets down to roughly a quarter full. Every so often the brine tank needs a cleanout, and our Water Softener Repair & Maintenance service handles that.
Does a softener remove chlorine?
No. It only pulls out hardness minerals. Chlorine taste and smell call for a carbon system, which we often put in just ahead of the softener.
What warranty comes with the install?
Our installation work is covered by a 1-year workmanship warranty. If a fitting we made starts to drip or a setting we programmed isn't working right, we come back out and fix it.
Will I lose water pressure?
A softener that's the right size for your home makes almost no difference to pressure. A drop usually points to a unit that's undersized for the house or a resin bed that has fouled. That's why we work out the size before we choose the unit.
Do you work outside Lakeland?
Yes. We install softeners in nearby towns like Highland City, Kathleen and Winter Haven, and throughout the surrounding area.

Ready to be done scrubbing scale?
Tell us what you're seeing at the faucets and in the laundry. We'll give you a straight answer on whether a softener fits and what it takes to put one in.